Family hearth "Lighthouse"

CARE OF CHAMOTTE SCULPTURES AND INTERIOR DECOR PIECES

The surface of fine-grain chamotte sculptures can be porous. Especially when unglazed, it may be more sensitive to friction, absorbing dirt and improper wet cleaning. The main recommended method of care is dry cleaning.

Precious metal lustres (gold, platinum, palladium, etc.) form a thin decorative layer applied in a lower-temperature firing. This layer is sensitive to abrasives and friction, so surfaces with such decoration should be cleaned with great care, avoiding scrubbing.

MATERIAL PROPERTIES

Chamotte is clay that has been fired at a high temperature and ground, then mixed into the ceramic body. It reduces shrinkage during drying and firing, helps the piece dry more evenly and can increase resistance to thermal stress, especially in larger forms. Depending on the composition of the ceramic body, the firing temperature and the surface finish, an unglazed surface may be porous and absorb dirt more easily.

These care recommendations apply to fine-grain chamotte sculptures and interior decor pieces, which may be unglazed, partly glazed or fully glazed.

CLEANING

Dry cleaning (the main method). Gently remove dust with a soft brush, guiding it towards the nozzle of a vacuum cleaner set to minimum suction. Avoid rough cloths, as they can scratch the surface or dull the shine of the decorative layer.

Wet cleaning only in exceptional cases. Washing or soaking is not recommended, especially if the surface is porous, has been repaired before or the condition of the piece is unknown. If sticky or other stubborn dirt must be removed, it is best to consult a specialist first.

DISPLAY AND STORAGE

Chamotte sculptures and interior decor pieces should be displayed on stable surfaces that can bear their weight, in places where they cannot be accidentally knocked or tipped over.

When moving a sculpture, always support it by the main body or the base. Never lift it by protruding, narrow or decorative elements.